Felt Lap Vent

Need some help?

If you need to speak to someone about this product, our sales and technical support advisors are here to help.

Get in touch >

BIM

We have partnered with the BIMstore to help provide you with the highest standard of BIM content around.

Browse BIM Information >

Product Code G630

275 x 20 x 194mm
3,000mm²
400mm
50 per box
4.25kg
Polypropylene
Injection Moulded
Yes

Product Description & Key Features

The Manthorpe Felt Lap Vent is a refurbishment product designed to increase the amount of ventilation into existing roof spaces.

Usually fitted retrospectively to properties with additional loft insulation recently installed, however the Felt Lap Vent will help to combat the problem of condensation build up in any roof space with a lapped felt/membrane construction.

The product has been designed as a remedial solution to help overcome the build-up of condensation in the roof space, however like all products that open the felt lap to provide ventilation it does not meet the code of practice BS 5534:2014+A2:2018 6.2.1.1.  The specifier or user should be aware that the opening of felt laps on the roof may adversely affect the driving rain resistance of the slates, tiles or shingles, as well as increase the wind uplift forces acting on them.

  • 3,000mm² airflow per G630
  • Can be fitted at joist centres ranging from 400mm to 600mm
  • Easy to fit, the tapered lead in helps to slot the product between the felt laps
  • The 3 felt clips help secure the product in place even if the edge of the felt is degraded

Literature and Technical Info

Request a call back

Request a Call Back

Request a call back

Close