Dry Fix Hip Support Tray

Need some help?

If you need to speak to someone about this product, our sales and technical support advisors are here to help.

Get in touch >

BIM

We have partnered with the BIMstore to help provide you with the highest standard of BIM content around.

Browse BIM Information >

Product Code GDRH-ST

1100 x 250 x 52mm
10 per pack
6.6kg
PVCu
Extrusion
Yes

Product Description & Key Features

The Hip Support Tray is fitted above the Vent Roll when installing the Manthorpe Dry Hip System to provide a straight and level platform to support the tiles up the hip of the roof. This is particularly necessary when using profiled or deep flat tiles. The tray is 1100mm long and must overlap the tray below it on the hip by 100mm. The trays can easily be cut to length or shaped to the angles required at the eaves of the hip and ridge-hip junction by using a sharp utility knife. Simply fasten the Hip Support Tray to the previously installed hip battens using suitable stainless steel nails.

  • Fitted above the Vent Roll on hip details
  • Provides a straight and level platform to support the tiles up the hip of the roof
  • Can be easily be cut down to length
  • Angles required at the eaves or ridge-hip junction can be easily formed

Literature and Technical Info

Request a call back

Request a Call Back

Request a call back

Close